Fail Safety Unit (FSU 01)
A compact safety unit with 4 fault detection, built-in buzzer and charge lamp, and a 70 Amp relay contact.
Key features
- 2 Fault inputs
- Built in buzzer
- LOP bypass timer
- 4 Fault Detection
- Fuse fail indication
- Built in Charge lamp
- Stop timer for ES type Solenoid
Made in Pune
Factory tested
Engineer support
About the Fail Safety Unit (FSU 01)
The Fail Safety Unit FSU 01 is a compact, cost-effective way to protect an engine. It detects four fault conditions using two fault inputs, indicates fuse failure, and includes a built-in charge lamp.
A built-in buzzer gives an audible alarm, so a fault is noticed even when nobody is watching the panel. The LOP bypass timer prevents false trips while the engine starts, and a stop timer suits ES (Energised to Stop) solenoids. The 70 Amp relay contact can drive the stop solenoid directly. It works on 8 to 35 V DC and fits a 72 × 72 mm cut-out.
Specifications
- Dimension
- 72 X 72 X 120
- Supply
- 8-35VDC
- Relay Contact
- 70 Amp max
What the technical words mean
- LOP / LLOP
- Low (Lube) Oil Pressure. If oil pressure falls too low, the engine is shut down before its bearings are damaged.
- LOP bypass timer
- Oil pressure is low for a few seconds while an engine starts. This timer ignores low oil pressure during that time so the engine is not stopped by mistake.
- ES solenoid
- Energised to Stop. A fuel solenoid that must be powered to stop the engine. The stop timer keeps it powered long enough for the engine to come to rest.
- Charge lamp
- A lamp that shows whether the engine’s battery charging alternator is working.
- Fuse fail indication
- Warns when the fuse protecting the safety circuit has blown, so the engine is never left running without protection.
More Engine Safety Units
View all →Engine Safety Unit ER
A compact engine safety unit that detects 6 faults, with a built-in charge lamp, LOP bypass timer and a 70 Amp contact.
HR01
HR01
Engine hour meter with RPM display and built-in over and under speed relay, field settable on site.
HR Meter
A compact hour meter and RPM display with a built-in over speed relay.
KRB 202
KRB 202
A full-featured engine safety and hour meter unit with 4 fault inputs, reverse battery protection and a 70 Amp solenoid contact.
Interested in Fail Safety Unit (FSU 01)?
Send us your quantity and application. We will reply with price and delivery time.