Skip to content
RB Eco Power LLP logo

Front

Back

Genset Monitoring System (GMS 541)

Genset Monitoring System (GMS 541) Front 1 / 2

Genset Controller Units

Genset Monitoring System (GMS 541)

A full genset monitoring and AMF controller with 5 digital inputs, 4 analog inputs, 5 relay outputs and RS 485 communication.

Key features

  • 4 Analog Inputs
  • 5 Relay outputs
  • 5 Digital Inputs
  • Flexible AMF logic
  • Auto / Manual Modes
  • Displays RPM, Frequency, Hours
  • Periodic Start / Stop facility
  • Under voltage/over voltage protection
  • LED Indications for genset status & Alarms
  • Battery operated, available in 12VDC & 24VDC models
  • Integration of all engine and alternator parameters
  • Built in single phase / three phase monitor and protection

Made in Pune

Factory tested

Engineer support

Product overview

About the Genset Monitoring System (GMS 541)

The GMS 541 Genset Monitoring System brings every important engine and alternator parameter together in one 96 × 96 mm controller. It displays RPM, frequency and running hours, monitors single or three phase output, and protects the genset against under and over voltage. It is battery operated and available in 12 V DC and 24 V DC models, working across an 8 to 35 V DC supply.

Flexible AMF logic lets the GMS 541 start the genset automatically when mains fails, and Auto and Manual modes give the operator full control. A periodic start and stop facility exercises standby gensets so they are always ready. LED indications show genset status and alarms at a glance, and RS 485 communication lets it connect to monitoring systems.

The front panel keeps operation simple: an LCD for readings and settings, Up, Down and Setting keys to move through menus, an Alarm lamp, and large Start, Stop and Auto / Manual buttons, each with its own status lamp. On the back, numbered plug-in terminals with a printed label make wiring and servicing quick, with separate groups for genset voltage, mains voltage and the engine inputs and relay outputs.

The GMS 541 has been tested to demanding standards, including radiated emission and immunity, fast transients, surge and supply-line transients, with IP56 front protection. It is built for real engine-room conditions.

Specifications

Dimension
96*96*62
Supply
8-35 VDC
VAC input rating
415 VAC
—
RS 485 Communication.

Tested to standards

  • Radiated Emission as per EN55022
  • Radiated EM Field Immunity as per IEC 61000-4-3
  • Electrical Fast Transients / Burst ( EFT/B ) Immunity as per IEC 61000-4-4
  • Combination Wave Surge Immunity as per IEC 61000-4-5
  • Transient Immunity on Supply Line Test as per ISO 7637-2:2004(E) Standard
  • IP56 Protection as per IS: 13947 (Part 1)-1993
Terms explained

What the technical words mean

AMF
Automatic Mains Failure. The controller senses when mains power fails, starts the generator and switches the load over, then switches back when mains returns.
RS 485
A rugged industrial communication link used to connect controllers to monitoring systems.
IP rating
Ingress Protection. The first digit is protection against dust, the second against water. IP65 is dust tight and protected against water jets.

Interested in Genset Monitoring System (GMS 541)?

Send us your quantity and application. We will reply with price and delivery time.